![]() |
![]() |
![]() |
|
Airframe Corrosion: Your Aircraft's Real Killer How Does The This Technology Work? ![]() CorrosionX Family Of Products: ![]() |
![]() As anyone who runs a maintenance facility or GA salvage operation nowadays will confirm, that unless kept in check, it will be airframe corrosion that will eventually relegate your favorite Mooney, Bonanza, or Piper to the boneyard.The CorrosionX corrosion control formulas are considered THE most effective anti-corrosion treatment programs available for both aluminum and ferrous metals out there bar-none. Not only do the independent lab tests (both military/Navy and civilian) prove, but also countless field tests and real-world results confirm without a doubt that CorrosionX attacks corrosion right where it lives, and the technologically advanced CorrosionX formula not only works, but works exceedingly well! When it comes to prolonging the useful life of your aircraft, there is little doubt is the front-line defense for entire or whole GA airframes is to keep corrosion at bay. The CorrosionX formula has proven to to stop and help prevent corrosion especially when fogged internally via a professional fog/spray rig. CorrosionX Aviation Grade (blue label) has become the aviation industry's standard corrosion preventative compound is one of the few such products that is FAA/MIL Spec approved (only 3.7% solvent*) and is also widely used by the military. It is a multi-functional product that is an exceptional lubricant for rod ends(such as found in Mooneys), hinges, locks, and closure mechanisms. It is also an unexcelled penetrant for breaking loose rusted/corroded components (exhaust studs, inspection plate screws, etc.) and is excellent when applied topically for "spot" jobs via aerosol cans.
CorrosionX Utility Grade (red label) is similar but with some 8.7% solvent*, it is slightly thinner and has a slightly higher percentage of solvents than the MIL Spec Aviation Grade formula. It is great around the house, car, boat, or any place you need a penetrating oil and/or are concerned about rust and corrosion. Tests confirm and we feel it is "head and shoulders" better than the common "over the counter WD type" spray. Note: Typical WD-40 type products are actually upwards of 70% solvents.
RejeX is a "state of the art" thin-film polymer surface protectorate/coating that lab and military tests verify protects far better than ordinary wax or polish. It was originally developed for the U.S. military to assist getting stubborn and corrosive exhaust stains off of matte camo aircraft paints which are much more difficult to clean than normal gloss finishes. It proved to be far superior to any other product previously used and it has proved to be a run-away success at doing much more.
MOA Aerosol Can Straw Saver Note: We regret that we CAN NOT offer MOA Members "Free Freight" considerations on less than 2 unit/can orders of CorrosionX or RejeX. Click Here To Order Now At Our Best "On-Line" Prices |
|---|
|
MagnaLabs 8191 N Tamiami Trail Bldg C-6 Sarasota, FL 34243 877-564-6662 Fax: 941-485-4571 Click here to email us: info@moapilot.com |