Aero Bat Pac
Sweeping Pulse De-Sulfation Process
For Battery Conditioner/Maintainers*
(Note: As of Jan. 1, 03 we are only
shipping these units to commercial shops on a "special order" basis in bulk of 4 units
minim*)
Magna Labs has developed several models of Aero Bat Pacs that
(for the most part) are fully automatic. The T360GA and our solar powered units
utilizes a patented Sweeping pulse technology as does the 110v powered units.
However while effective at their intended purpose, we find these units are best
suited for shop environments where some degree of professional monitoring is
taking place rather than in situations where they are used totally un-attended
for months on end.
Sweeping Pulse
Technology is a patented*, variable frequency, variable boost voltage process guaranteed
to dissolve sulfate crystals back into the battery's electrolyte solution. All lead-acid
batteries are adversely affected by the buildup of these deposits. As they collect on
battery plates they restrict the flow of electrons and "lock away" active
material required for normal operation. As this barrier becomes thicker and thicker, the
battery's ability to accept a charge or deliver energy is drastically diminished,
resulting in the perception that the battery is no longer usable.
*By IES Inc. These 110v sweeping de-sulfating units are not generally
voltage sensitive and will de-sulfate and maintain/condition 6, 12, 24, & 36 volt
batteries, but are not to be considered battery chargers per se.
| *3/1/04
NOTE: Due to the fact these units
aren't as automatically regulated as our computerized tuned frequency
units and therefore aren't as suitable for long-term unattended use, we
are limiting sales to commercial accounts only with a minimum of 4 units.
|
Sweeping
Pulse Technology allows the professional user to electronically dissolve sulfation formations back into
the electrolyte solution without taking the battery out of service. Most importantly, if a
new battery is equipped with Sweeping Pulse Technology it should always remain free and
clean of sulfate crystals allowing it to operate unhampered at full capacity. This
remarkable process generates no heat and can in no way harm the battery itself
providing certain precautions are taken.
Sweeping Pulse Technology Benefits
Not unlike tuned pulse technology, the principal benefit of Sweeping Pulse Technology is that it prevents the buildup of
sulfate crystals on battery plates. Eliminating the number one cause of battery failure,
Sweeping Pulse Technology will significantly extend battery life. Since the amount
of exposed active plate surface is critical for determining battery output, a battery with
clean plates and an unimpeded flow of electrons will accept a full charge and release all
of its stored energy. Use of this leading edge technology will maintain battery
efficiency.
Pulse Technology can save money by reversing the capacity robbing effects of
existing sulfation on batteries already in use and save even more by reducing man hours
performing routine battery maintenance. Continual use of this technology will reduce
battery disposal volumes, increase equipment readiness, and allow long term storage of
batteries in a usable condition.
Click Here For Information On Tuned Frequency Pulse De-Sulfators
Click Here For
Aviation FAQs
Click Here For Basic Specs and Operating Instructions
Click Here For Prices
Click Here To Learn More About Battery Sulfation On GA Batteries
Click Here For Pulse De-Sulfation FAQ's
Sweeping Pulse
Technology is a patented*, variable frequency, variable boost voltage process guaranteed
to dissolve sulfate crystals back into the battery's electrolyte solution. All lead-acid
batteries are adversely affected by the buildup of these deposits. As they collect on
battery plates they restrict the flow of electrons and "lock away" active
material required for normal operation. As this barrier becomes thicker and thicker, the
battery's ability to accept a charge or deliver energy is drastically diminished,
resulting in the perception that the battery is no longer usable.